#include <head_file.h>


bit flag = 0;
unsigned char time = 0;
unsigned int worktime = 0;//定义持续时间变量
uint times = -1;
bit times_flag = 0;
uchar times_temp = 0;
bit auto_flag = 0;
uchar start_temp;
uchar wind_speed = 4;

int main(){
				
		unsigned int tempp;
		TMOD=0x11;//定时器0工作方式1,定时器1工作方式1
		TH1=0xff;//(65536-10)/256;//赋初值定时
		TL1=0xf6;//(65536-10)%256;//0.01ms
		TH0=0xfc;//(65536-1000)/256;//赋初值定时/用于定工作时间
		TL0=0x18;//(65536-1000)%256;//1ms
		EA=1;//开总中断
		ET1=1;//开定时器1中断	 
		TR1=1;//启动定时器1
		t=50;
		flag=1;
		IT0 = 0;
		EX0 = 1;
		L298_Config();
		//LCD1206_config();
		//init();
		P08 = 0;
		start_temp = GET_Temperature();
		while(1){
			tempp = GET_Temperature();
			if(tempp>=50&&(tempp-temp)<=2){
				  P0 |= 0xf0; 
					P08 = 0;
				  set_t(0);
					buzzer();
			}
			if(temp!= tempp&&tempp<80)flag_button = 1,temp = tempp;
			if(flag_button){
					ShowLcd();
					flag_button = 0;
			}
			if(Time_button == 0)set_time();
			if(auto_button == 0)auto_flag = !auto_flag,delay(5);
			if(auto_flag){
					flag_com = 4;
				  auto_set_mode();
			}
			delay(5);
			key();
		}
		
}
void buzzer(){
		int i=0;
		for(;i<20;i++){
				P04 = !P04;
				delay(5);
		}
}

void set_time(){
		times += 5000;
		flag_button = 1;
}

void auto_set_mode(){
		if(temp >= start_temp+2){
				start_temp = temp;
				if(wind_speed>1)wind_speed--;
				if(wind_speed == 1)P21 = 0;
				else if(wind_speed == 2)P22 = 0;
				else if(wind_speed == 3)P23 = 0;
				else if(wind_speed == 4)P24 = 0;
		}
		else if(temp <= start_temp - 2){
				start_temp = temp;
				if(wind_speed<4)wind_speed++;
				if(wind_speed == 1)P21 = 0;
				else if(wind_speed == 2)P22 = 0;
				else if(wind_speed == 3)P23 = 0;
				else if(wind_speed == 4)P24 = 0;
		}
}